USE OUR "SMALL KEIHIN MAIN JETS" THESE HAVE HONDA CT90K2 TO 1977 TYPE IDLE JETS.(ON ORDER) THIS CARB NEEDS OUR 300001.5 MANIFOLD TO WORK ON THE CT70'S YOU CAN THEN USE THE STOCK AIR FILTER OR CLAMP AN AFTERMARKET FILTER ON THE BACK. THIS WILL ALSO BOLT UP TO OUR BIG MANIFOLD (300002) AND THEN WITH A CLAMP ON FILTER FIT ON MOST 50'S AND 70'S IF YOUR PUTTING THIS ON A CT70K0/HK0 K1 K2 OR K3 MODEL,, OUR CABLE 0013 WORKS WITH OUT MODS. (THANKS ENZO) sometimes the inner cable length on the stock cable may be a little bit too long for the aftermarket carbs and not allowing for a complete throttle slide lifting, so you may want to get a solder on cable end so you can shorten it if needed... our number is (END)sold seperatly Dear dratv, the carb fit perfectly on my CL90. i did re-use the main jet as it was identical (except orifice size) but the idle jets were different lenghts so went with the one it came with. thanks - gumpwood59 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|