

50cc Engine Specs:
Type: 4-Stroke single-cylinder OHC air cooled
Bore & Stroke: 39 X 41.4mm
Compression ratio: 9.0 : 1
Displacement: 49cc
Max. HP: 3.0 HP @ 7,500 RPM
Max. Torque: 2.0 ftlbs @ 5,500 RPM
Idle: 1,500 RPM
Starter: Kick Start
Spark plug: A7TC or NGK C6HSA
Plug Gap: .28 or 0.6-0.8mm
Ignition system: CDI
Lubrication: Pressure / Splash
Oil capacity: .8L (10w-40)
Measurements: 17" x 10 1/4" x 8 1/4"
Weight 41 Pounds
Clutch: SEMI Auto
Gears: 3 speed
Magneto: Permanent magnetic
Voltage: 12 Volt
Engine: Has charging coil
The engine will bolt right in,, however there will be some issues like electrical system updating, finding places for cdi, regulator, ignition coil, etc. light bulbs, 6v vs. 12v.
But trust me it will be worth the effort !!!
THANK YOU !!!
IF YOUR INSTALLING THIS INTO A Z50A WITH LIGHTS BUT NO BATTERY,, YOU SHOULD GET ONE EACH OF THE PARTS LISTED BELOW ON THIS PAGE
|